The Volvo system is not, and what exacerbates it for me is that I can't just press my memory position, I have to hold it. I don't know any other cars that operate this way. My Audi and BMW just require a single press if I'm not sitting in the seat. If I'm in the seat, I understand the necessity to hold it down for safety reasons, but whenThe seats can be moved to change positions for different drivers so there's power to that part of the system, but there is no way to set up the memory for the individual Driver 1/Driver 2 key fobs. The buttons on the driver door to set up and assign that function seem not to work (no lights, no beeping when pressed as per the owners manual) and
Followed the procedure outlined in the manual. While the memory for exit seems to work fine (it always goes back when I shut down and open the door), the memory for my #1 seat position sometimes doesn't work. In fact, most of the time. When I start up, often only the steering wheel moves slightly but sometimes it moves the seat to the proper
Simply press the PowerFold button for the seats, which should fold and unfold the seats simultaneously. When you do this a few times, this should reset the system, which is often a quick fix for any third row seat problem. Also, make sure there are no obstructions that may be causing this problem.
Make sure memory is on. (The red button that sticks up. Down is "on" ) 2). Set seat, steering wheel and mirrors to your liking. 3). Press and hold memory number and memory set button until you hear a small click. 4). Move seat, steering wheel, and mirrors to a different setting and press and hold memory number until it is where you originally Received 2 Likes on 2 Posts. try this. Try this before bringing to the "AUDI TECH TEAM". [09] - Central Electronics. Basic Setting. Steering Column Adjustment. Prerequisites: Steering Column or the Central Electronics Control Module (J519) have been replaced. Approach all 4 end positions (up, down, forward, back). Vf7X0A5.audi seat memory not working
